Iscar Announces A Completely New Family Of Slitting Cutters Applying Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar at this time offers a family of high-performance slitting tools that join the convenience and security of Tang-Grip clamping with the increased sturdiness of the completely new Sumo Tec insert grades.
The conception, already demonstrated effective in Tang-Grip parting tools, has now been spread to slitting cutters. In the patented Tang-Grip clamping system, inserts are press-fit into their pockets with a distinct hand tool, and are clutched tightly in place without having the need without requiring clamps, upper jaws or set screws that can weaken the insert and obstruct chip flow. The pocket configuration utilizes cutting forces to retain the insert seated securely in position, preventing any prospect of insert pull-out. The Tang-Grip clamping system also fosters increased accurate slitting cuts plus increased pocket and insert lifespan.
Iscar's Sumo Tec insert grades showcase a specific post-coating treatment which extensively increases tool life and reliability.
Unveiled in late 2007, the revolutionary Sumo Tec treatment flattens the insert's coated surface to dispose of microscopic stress raisers, diminish heat and friction and enhance chip flow. The result is enhanced toughness and opposition to chipping and built-up edge, all leading to longer tool lifespan. The golden-colored side on Sumo Tec inserts aides wear detection. Size for size, Tangslit cutters give more teeth than Iscar's SGSF cutters, permitting higher feed rates.
Their increased rigidity leads to straighter, increased accurate cuts and lowered vibration even in large-diameter cutters. The revolutionary Tangslit TGSF cutters come in 100 to 160 mm diameters, 3 and 4 mm widths and can accommodate the exact same assortment of inserts as Tang-Grip parting tools. Several other sizes will be added.
Existing Sumo Tec grades for Tangslit cutters include:
IC808, with a tough submicron substrate below a Sumo Tec TiAlN PVD coating, providing exceptional resistance to impact loads and built-up edge. This grade is endorsed for slitting heat resistant alloys, austenitic stainless steel, hard alloys & carbon steel.
IC830, supplying extra toughness for heavier parting & grooving including interrupted cuts. It is suited for any stainless steel & high temperature alloys.
IC908, a hard, fine-grain substrate with superior chipping resistance, joined with a brand new Sumo Tec TiAlN PVD coating. It is perfect for nodular or gray cast iron.
IC928 and 928A, PVD TiAlN-coated tough grades suited for stainless steel, high temperature alloys and other alloy steels. These grades are additionally suggested for interrupted cuts and heavy operations.
Each Tangslit and Tang-Grip inserts are attainable in J- or C-type chipformer geometries from Iscar.
Iscar Adds Their Most Recent Innovations To A Extensive Line Of Prospering Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
Iscar Recently Releases A Variety Of Revolutionary Lines To Enlarge Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Original Tools And Carbide Insert Configurations From Iscar To Better Improve The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.
Some Of The Countless Advancements In Carbide Inserts From Iscar Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
Completely New End Mills Coming From Iscar Will Amplify Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Completely New Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.
Go Into A Brand New Career And Go With Automotive Manufacturing Jobs.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.